ENGLISH

USER MANUAL

 

 

 

 

SKIRT HEIGHT AND OPERATION CHECK

Preliminary procedure

1.Empty the hopper (as shown in the User Manual), because the weight of the waste inside the hopper can affect the skirt height check.

2.Drive the machine on a level floor that is suitable for checking the skirt height.

3.Engage the parking brake with the pedal (82) and the lever (75).

4.Turn the ignition key (69) to “0”.

Side skirt check

5.Release the fasteners (8 and 6), then open the right and left door (7 and 5).

6.Check the side skirts (A, Fig. 19) for integrity.

Replace the skirts when they have cuts (A, Fig. 20) larger than 20 mm or cracks/tears (B) larger than 10 mm (for skirt replacement, refer to the Service Manual).

7.Check that the distance from the floor of the side skirts (A, Fig. 19) is within 0 - 3 mm (see Fig. 21). If necessary, loosen the screws (B, Fig. 19) and adjust the skirt position. Then tighten the screws (B).

Front and rear skirt check

8.Remove the main broom as shown in the relevant paragraph.

9.Check the front (A, Fig. 22) and rear skirts (B) for integrity.

Replace the skirts when they have cuts (A, Fig. 20) larger than 20 mm or cracks/tears (B) larger than 10 mm (for skirt replacement, refer to the Service Manual).

10.Check that the front (A, Fig. 22) and rear skirts (B) slightly rub on the floor (see Fig. 24).

If necessary, loosen the screws (C, Fig. 22) and adjust the skirt position. Then tighten the screws (C).

11.Press the front skirt lifting pedal (81) completely, and check that the front skirt lifts 5 cm approximately.

Release the pedal and check that the skirt does not remain in an intermediate position but returns to its initial position. If necessary, adjust the skirt lifting cable (A, Fig. 23) with the adjuster (B) on the left front side of the skirt (for the front skirt control cable replacement, see the Service Manual).

Reset

12. Assemble the components in the reverse order of disassembly.

P100232

P100233

P100234

Figure 19

Figure 20

Figure 21

P100235

P100236

P100237

Figure 22

Figure 23

Figure 24

26

FLOORTEC R 680 P

1463514000(1)2008-05 A

Page 91 Page 93
Page 92
Image 92
Nilfisk-ALTO R 680 P Skirt Height and Operation Check, Preliminary procedure, Side skirt check, Front and rear skirt check
Page 91 Page 93

R 680 P specifications

The Nilfisk-ALTO R 680 P is a robust and versatile professional vacuum cleaner designed for a range of heavy-duty cleaning tasks. This model stands out for its powerful suction capabilities and user-friendly features, making it a popular choice among cleaning professionals and industries that require high-efficiency vacuuming solutions.

One of the key features of the R 680 P is its strong motor, which provides optimal performance in both wet and dry conditions. The vacuum is equipped with a high-efficiency turbine that ensures consistent suction power, allowing it to tackle even the most challenging debris, including liquids, dust, and larger particles. This versatility makes it suitable for use in diverse environments such as construction sites, workshops, and manufacturing facilities.

In terms of design, the R 680 P boasts a robust exterior that can withstand the rigors of industrial cleaning. It features a large capacity waste container, reducing the frequency of emptying and increasing productivity. The ergonomic handle and lightweight construction enhance maneuverability, making it easy to transport across various job sites.

The vacuum cleaner is also equipped with an advanced filtration system that captures fine dust particles and allergens. This is particularly important in maintaining air quality in enclosed spaces. The HEPA filters can be replaced easily, ensuring that the machine operates efficiently over time. Additionally, the vacuum has a practical filter cleaning system that helps maintain suction performance, making it ideal for continuous use.

Another outstanding characteristic of the R 680 P is its noise reduction technology. This feature allows for quieter operation without compromising on suction power, which is essential for environments where noise levels must be kept to a minimum.

The Nilfisk-ALTO R 680 P also includes various attachments and accessories that enhance its functionality. From specialized nozzles for crevices to larger brushes for wide surfaces, it can be customized for specific tasks. The versatility offered by these accessories makes this vacuum an indispensable tool for any professional cleaning team.

In summary, the Nilfisk-ALTO R 680 P is a powerful and efficient vacuum cleaner that combines strong suction capabilities with advanced filtration and user-friendly design. Its durability, versatility, and range of features make it an essential choice for professionals seeking a reliable cleaning solution in demanding environments. Whether dealing with wet or dry messes, the R 680 P is designed to tackle tough cleaning challenges effectively.
Top Page Image Contents