22Chapter 2 Installing the i2050 Software Phone
Select Sound Devices
Table 1 Select Sound Devices
Attribute | Description | |
|
| |
Headset | Allows you to select the microphone used for making calls. | |
Microphone | Select USB Audio Device. | |
| ||
|
| |
Headset Speaker | Allows you to select the speaker used for making calls. | |
| Select USB Audio Device. | |
|
| |
Ringing Speaker | Allows you to select a different speaker as a ringing device. If you select the computer speakers | |
| rather than on the headset, you can hear the phone ringing when you have taken the headset off. | |
|
| |
Audio Quality | Allows you to adjust the internal buffering on the computer. This allows you to compensate for | |
| computer performance. | |
| If the audio is choppy or broken, move the slider toward Higher Quality. | |
|
| |
I use a modem to | Select this option if you are using a low speed connection. | |
connect to the | When you select this option, the i2050 Software Phone reports to the communications server that | |
network | ||
G729 and G723 are the supported codecs. The communications server may select G711 later | ||
| ||
| depending upon its programming. | |
| When you clear this option, the i2050 Software Phone reports that it supports G711, G723 and | |
| G729A/G729AB. Not all servers support all codecs. | |
| G711 requires high bandwidth; G729 requires medium bandwidth; G723 requires low bandwidth. | |
|
| |
Apply to all users | Users with administrator privileges (as determined by Windows) can apply selected audio | |
| settings to all users on this computer. | |
|
|
Note: You can also access the Select Sound Device tab from i2050 Software Phone interface by clicking Configure Audio on the System menu or the File menu.
