Nortel Networks i2050 manual Session data, Current User data

46Chapter 4 Nortel Networks i2050 Diagnostic Utility

Session data

The session data indicates when a session is started, stopped and in some cases a detailed reason why the application was stopped.

The session data information applies to the current user of the i2050 Diagnostic Utility.

Table 7 Session data

Data	Description
Session Start	The current connection is indicated by the IP address of the current TPS (Terminal Proxy Server).
	The time indicates when the session was connected. The previous 6 connection starts are also
	indicated by time stamps.
	• Assign Terminal ID is a UNISTIM message that the i2050 Diagnostic Utility uses to indicate
	the start of the session.
Session End	The last 6 or 7 connection end times are indicated in this column.
	• Server Switch indicates the session was ended when the TPS instructed the i2050 Software
	Phone to move to another server. In some systems this is done for load balancing reasons.
	• internalShutdown indicates the i2050 Software Phone reset on its own. This may be due to
	the user exiting the application.
	• Watchdog Expired indicates a loss of connectivity with the communications server.
	• SoftReset and HardReset indicate the communications server has instructed the i2050
	Software Phone to reset.
Reason	More detail on the reason the i2050 Software Phone shutdown, such as Watchdog Expired.

Current User data

The Current User data overrides the System data. When a value is present in this table and replicated in the System Data table, the value in use is the value for the current user of i2050 Diagnostic Utility. When a value is unassigned here, the value in use is the value that appears in the System data table.

The current user data information applies to the current user of the i2050 Diagnostic Utility.

Table 8 Current User data

Data	Description
Current Skin	The i2050 Software Phone skin selected by the user.
	Source: i2050->Select Skin
Language	The language selected by the user.
Selected	Source: i2050->Select Language
Use 802.1p	Indicates whether QoS 802.1p is being used.
	Source: QoS 802.1p
I use a modem to	• Slow connection indicates the check box is selected.
connect	• Fast Connection indicates the check box is cleared.
	Source: Select Sound Devices I use a modem to connect to the network
PC Audio Buffer	The setting for the PC Audio Buffer (Audio Quality Slider).
	Source: Select Sound Devices Audio Quality slider

P0988431 Issue 03