Chapter 2 Installing the i2050 Software Phone 31
Registering the i2050 Software Phone on Business Communications Manager
If you are using a Business Communications Manager as your communications server, the first time you start the i2050 Software Phone you must register with the Business Communications Manager system.
To register your i2050 Software Phone on a Business Communications Manager system:
1Start the i2050 Software Phone.
2If a password prompt appears on the i2050 Software Phone display, enter the registration password and press the OK soft key.
If you do not know the registration password, contact your system administrator.
3If a DN prompt appears on the i2050 Software Phone display, enter the DN you want assigned to this telephone and press the OK soft key.
After the registration is complete, you do not need to go through the registration steps described above unless you deregister the terminal.
If the i2050 Software Phone cannot register or cannot find the communications server, refer to the IP Telephony Configuration Guide for more information about registering IP telephones.
i2050 Software Phone Installation Guide
