24Chapter 2 Installing the i2050 Software Phone
QoS
Use this screen to enable Quality of Service (QoS) support on the i2050 Software Phone.
Table 2 Quality of Service (QoS)
Attribute | Description |
|
|
On | Select this option to turn 802.1 QoS on. |
| When you select this option and the QoS Service is installed and running, the i2050 Software |
| Phone adds 802.1q to the i2050 Software Phone packets. It will also assign 802.1p as per the |
| Communications Server definition (default 6). |
|
|
Off | Select this option to turn 802.1 QoS off. |
| When you select this option, the i2050 Software Phone does not add 802.1q to the i2050 |
| Software Phone packets, regardless of whether the QoS Server is present. |
|
|
Automatic | Select this option if you want the i2050 Software Phone to decide if the 802.1 QoS is used. |
detection | When you select this option, the i2050 Software Phone will attempt to connect with 802.1q added |
| |
| to the packets. If the attempt is successful, then the i2050 Software Phone will use 802.1q for the |
| call. If the attempt fails (there is a timeout after approximately 1 second), the i2050 Software |
| Phone will attempt to connect again without adding 802.1q to the packets. |
| This is the default option. |
|
|
Apply to all users | Users with administrator privileges (as determined by Windows) can apply the QoS settings to all |
| users on this computer. |
|
|
