| The ASEM Interface 29 |
Switch Tree Context Menu items | |
|
|
Menu Item | Description |
|
|
Configure | Provides access to configuration commands for |
| the switch. |
|
|
Monitor | Provides access to the monitoring commands |
| for the switch. |
|
|
Apply Configuration | Applies any changes that have been made to |
| the switch configuration. |
|
|
Save Configuration (back up) | Saves the current configuration in backup |
| memory and saves the active configuration by |
| overwriting the current configuration. |
|
|
Save Configuration (no back | Saves the current configuration to the flash |
up) | memory. |
|
|
Revert | Reverts the switch to the current active |
| configuration. This is available if the new |
| configuration settings were not applied. |
|
|
Revert Apply | Reverts the switch to the current saved |
| configuration. This is available if the new |
| configuration settings were applied but not |
| saved. |
|
|
Reset Switch | Reloads and saves the current RAM memory. |
| This is similar to cycling the power of the switch. |
| This feature is only available to Nortel |
| Application Switches. |
|
|
Diff | Opens a screen to display any pending |
| configuration changes. |
| This feature is only available on Nortel |
| Application Switches. |
|
|
Diff Flash | Opens a screen to display any pending |
| configuration changes and the affected |
| configuration stored in flash memory on the |
| switch. |
| This feature is only available on Nortel |
| Application Switches. |
|
|
Nortel Application Switch Element Manager
Users Guide
5.0 28 January 2008
Copyright © 2008, Nortel Networks
