44 Using the Nortel Application Switch Element Manager
Modifying the list of well-known ports
The ports.properties file contains a list of ports known to be used
by various protocols. This is used in the ASEM application where a list of
such ports is useful. This list can be edited in a simple text editor to add or
delete ports. For a list of well-known ports, refer Nortel Application Switch
Operating System 24.0 Command Reference (NN47220-105).
Tomodify the ports.properties file, perform the following procedure:
Step Action
1Open the ports.properties file in a text editor. This file is
located in <ASEM installation directory>/properties.
2All entries in the file are listed in the following format:
Protocol=Port
Edit the file as appropriate using the format listed above.
Note: Editing the ports.properties file can havean adverse
affect on the application. Ensure all changes to this file are
intended before saving them.
3Save the changes made to the file. These changes are displayed
the next time the application is started.
—End—
Modifying or adding Well-known Protocols
The protocols.properties file lists well-known protocols. This is used
in the ASEM application where a list of such protocols is useful. This list can
be edited in a simple text editor to add or delete protocols.
Tomodify the protocols.properties file, perform the following
procedure:
Step Action
1Open the protocols.properties file in a text editor. This file is
located in <ASEM installation directory>/properties.
2All entries in the file are listed in the following format:
Protocol=Index Value
Edit the file as appropriate using the format listed above.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Copyright© 2008, Nor tel Networks
.