Nortel Networks NN47220-101 manual End

Setting ASEM Properties 7
—End—
Property screen fields
Field Description
Polling Fields
Status Interval The interval at which statistics and status information are
gathered.
(If Traps, Status
Interval) If the Register for Traps check box is selected, then it specifies the interval in seconds at which statistics and
status information are gathered.
Hotswap Detect The multiples of polling intervals between hotswap checks.
Enable If checked, ASEM polls the switch according to the settings
listed above the Enable check box.
SNMP Fields
Retry Count Thenumber of times ASEMretransmits any SNMPmessage
before reporting a timeout message.
Timeout The length oftime between each retry of each SNMP waiting
period, from 3 to 30 seconds.
If the retry count is set to 2 and the time-out value to 5
seconds, ASEM reports a timeout (no response from the
switch) after 10 seconds.
Trace If checked, ASEM sends detailed SNMP information to the
log.
Register for Traps If checked, ASEM attempts to register the client’s IP address
to one of the trap hosts’ IP fields.
Listen for Traps If checked, ASEM listens for traps and attempts to hook to
the trap port 162.
Max Traps in Log The specified number of traps that may exist in the trap log.
The default is 500.
Trap Port The number of the port on which trap messages are
captured. The default is 162.
General Fields
Listen for Syslogs If checked, ASEM listens for syslogs and attempts to hook
to the syslog port 514.
Confirm row
deletion If checked, ASEM requests for confirmation each time a row in the application is deleted.
Nortel Application Switch Element Manager
Users Guide
NN47220-101 (320512-D) 01.01 Standard
5.0 28 January 2008
Copyright© 2008, Nor tel Networks
.