Nortel Networks NN47250-500 Specifying band preference for RF load balancing

Configuring RF load balancing for APs 253
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Specifying band preference for RF load balancing
If a client supports both the 802.11a and 802.11b/g bands, you can configure WSS to steer the client to a less-busy radio
on an AP for the purpose of load balancing. A global “band-preference” option controls the degree of concealment that
an AP with two radios attempts to hide one of the radios from a client with the purpose of steering the client to the other
radio.
To cause clients that support both the 802.11a and 802.11b/g radio bands to be steered to a specific radio on the AP for
the purpose of load balancing, use the following command:
set band-preference {none | 11bg | 11a}