436 Configuring quality of service
NN47250-500 (Version 03.01)
WSS# set qos cos-to-dscp-map 6 dscp 55
success: change accepted.

Using the client DSCP value to classify QoS level

To configure WSS Software to classify the QoS level of IP

Enabling broadcast control

To enable broadcast control features on a service-profile basis, using the following commands:
set service-profile name proxy-arp {enable | disable}
set service-profile name dhcp-restrict {enable | disable}
set service-profile name no-broadcast {enable | disable}
For example, to enable all these broadcast control features in service profile sp1, use the following commands:
WSS# set service-profile sp1 proxy-arp enable
success: change accepted.
WSS# set service-profile sp1 dhcp-restrict enable
success: change accepted.
WSS# set service-profile sp1 no-broadcast enable
success: change accepted.

Displaying QoS information

You can display the following types of information for QoS:
Radio profile QoS settings: QoS mode, U-APSD support
Service profile QoS settings: CAC, static CoS, and broadcast control settings
Broadcast control settings
Default CoS mappings
Individual DSCP-to-CoS or CoS-to-DSCP mappings
The DSCP table (a reference of standard mappings from DSCP to IP ToS and IP precedence)
QoS Statistics for the AP forwarding queues