Nortel Networks NN47250-500 Displaying Auto-RF information

Configuring Auto-RF 399
Nortel WLAN—Security Switch 2300 Series Configuration Guide
You can lock down channel or power settings on a radio-profile basis. WSS Software implements the lock down by
changing the set ap radio channel or set ap radio tx-power command for each radio managed by the radio profile.
To lock down channel or power settings, use the following commands:
set radio-profile name auto-tune channel-lockdown
set radio-profile name auto-tune power-lockdown
To verify the static settings, use the show ap config command.
To save the locked down settings, you must save the switch’s configuration.
The following commands lock down the channel and power settings for radios in radio profile rp2:
WSS# set radio-profile rp2 auto-tune channel-lockdown
success: change accepted.
WSS# set radio-profile rp2 auto-tune power-lockdown
success: change accepted.
Displaying Auto-RF information
You can display the Auto-RF configuration, a list of RF neighbors, and the values of RF attributes.
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)