660 Managing 802.1X on the WSS
NN47250-500 (Version 03.01)

Setting the 802.1X quiet period

The following command configures the number of seconds a WSS remains quiet and does not respond to a supplicant
(client) after a failed authentication:
set dot1x quiet-period seconds
The default is 60 seconds. The acceptable range is from 0 to 65,535 seconds.
For example, type the following command to set the quiet period to 300 seconds:
WSS# set dot1x quiet-period 300
success: dot1x quiet period set to 300.
Type the following command to reset the 802.1X quiet period to the default:
WSS# clear dot1x quiet-period
success: change accepted.