Nortel Networks NN47250-500 Displaying the running configuration

Managing system files 751
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Displaying the running configuration
To display the configuration running on the WSS, use the following command:
show config [area area] [all]
The area area parameter limits the display to a specific configuration area. (For more information, see the
Nortel WLAN Security Switch 2300 Series Command Line Reference.)
The all parameter includes all commands that are set at their default values. Without the all parameter, the
show config command lists only those configuration commands that set a parameter to a value other than the
default.
To display the running configuration, type the following command:
WSS# show config
# Configuration nvgen'd at 2004-5-1 0 19:08:38
# Image 2.1.0
# Model WSS
# Last change occurred at 2004-5-10 16:3 1:1 4
set trace authentication level 10
set ip dns server 10.10.10.69 PRIMARY
set ip dns server 10.20.10.69 SECONDARY
set ip route default 10.8.1.1 1
set log console disable severity debug
set log session disable severit y alert
set log buffer enable severity error messages 200
set log trace disable severity error mbytes 10
set log server 192.168.253.11 severity critical
set timezone PST -8 0
set summertime PDT start first sun apr 2 0 end last sun oct 2 0
set syste m na me WSS
set system countrycode US
set system contact nortel-pubs
set radius server r1 address 192.168.253.1 key sunflower
set server group sg1 members r1
set enablepass password b6b706525e1814394621eeb2a1c4d5 803fcf
set authentication console * none
set authentication admin * no ne
set user tech password encrypted 1315021018
press any key to continue, q to quit.
To display only the VLAN configuration commands, type the following command:
WSS# show config area vlan
# Configuration nvgen'd at 2004-5-1 0 19:08:38
# Image 2.1.0
# Model WSS
# Last change occurred at 2004-5-10 16:3 1:1 4
set vlan 1 port 1