108 Configuring and managing ports and VLANs
NN47250-500 (Version 03.01)

Configuring a port name

Each WSS port has a number but does not have a name by default.

Setting a port name

To set a port name, use the following command:
set port port name name
You can specify only a single port number with the command.
To set the name of port 14 to adminpool, type the following command:
WSS# set port 14 name adminpool
success: change accepted.

Removing a port name

To remove a port name, use the following command:
clear port port-list name
Note. To avoid confusion, Nortel recommends that you do not use numbers as port
names.