Configuring APs 347
Nortel WLAN—Security Switch 2300 Series Configuration Guide

Displaying radio profile information

To display radio profile information, use the following command:
show radio-profile {name | ?}
Entering show radio-profile ? displays a list of radio profiles.
To display radio profile information for the default radio profile, type the following command:
WSS# show radio-prof ile default
No service profiles configured.
(For information about the fields in the output, see the Nortel WLAN Security Switch 2300 Series Command Line
Reference.)
Beacon Interval: 100 DTIM Interval: 1
Max Tx Lifetime: 2000 Max Rx Lifetime: 2000
RTS Threshold: 2346 Frag Threshold: 2346
Long Preamble: no Tune Channel: yes
Tune Power: no Tune Channel Interval: 3600
Tune Power Interval: 600 Power ramp interval: 60
Channel Holddown: 300 Countermeasures: none
Active-Scan: yes RFID enabled: no
WMM Powersave: no QoS Mode: wmm