728 Rogue detection and counter measures

NN47250-500 (Version 03.01)

Displaying RF detection information

You can use the CLI commands listed in Table 44 to display rogue detection information.

Table 44.Rogue detection show commands

Command Description

show rfdetect clients
[mac mac-addr]Displays all wireless clients detected on the air.
show rfdetect counters Displays statistics for rogue and Intrusion
Detection System (IDS) activity detected by the
APs managed by a WSS.
show rfdetect mobility-domain
[ssid ssid-name | bssid mac-addr]Displays information about rogues detected in a
Mobility Domain.
This command is valid only on the Mobility
Domain’s seed switch.
show rfdetect data Displays information about all BSSIDs detected
on the air, and labels those that are from rogues
or interfering devices.
This command is valid on any switch in the
Mobility Domain.
show rfdetect visible mac-addr
show rfdetect visible
ap ap-num [radio {1|2}]
show rfdetect visible
ap ap-num [radio {1|2}]
Displays the BSSIDs detected by a specific
Nortel radio.
show rfdetect countermeasures Displays the current status of countermeasures
against rogues in the Mobility Domain.
This command is valid only on the Mobility
Domain seed.
show rfdetect vendor-list Displays the list of OUIs that are allowed on the
network. An OUI identifies a piece of
networking equipment’s vendor. (See
“Configuring a permitted vendor list” on
page 710.)
show rfdetect ssid-list Displays the list of SSIDs that are allowed on
the network. (See “Configuring a permitted
SSID list” on page 711.)
show rfdetect black-list Displays the list of wireless clients that are not
allowed on the network. (See “Configuring a
client black list” on page 712.)