650 Managing 802.1X on the WSS
NN47250-500 (Version 03.01)

Enabling and disabling 802.1X globally

The following command globally enables or disables 802.1X authentication on all wired authentication ports on a WSS:
set dot1x authcontrol {enable | disable}
The default setting is enable, which permits 802.1X authentication to occur as determined by the set dot1X
port-control command for each wired authentication port. The disable setting forces all wired authentication ports to
unconditionally authorize all 802.1X authentication attempts by users with an EAP success message.
To reenable 802.1X authentication on wired authentication ports, type the following command:
WSS# set dot1x authcontrol enable
success: dot1x authcontrol enabled.