Nortel Networks NN47250-500 Authenticating at the console

Configuring Web-based AAA for administrative and local access 81
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Authenticating at the console
You can configure the console so that authentication is required, or so that no authentication is required. Nortel recom-
mends that you enforce authentication on the console port.
To enforce console authentication, take the following steps:
1Add a user in the local database by typing the following command with a username and password:
WSS# set user username password password
success: change accepted.
2To enforce the use of console authentication via the local database, type the following command:
WSS# set authentication console * local
3To store this configuration into nonvolatile memory, type the following command:
WSS# save config
success: configuration saved.
By default, no authentication is required at the console. If you have previously required authentication and have decided
not to require it (during testing, for example), type the following command to configure the console so that it does not
require username and password authentication:
WSS# set authentication console * none
Caution! If you type this command before you have created a local username
and password, you can lock yourself out of the WSS. Before entering this
command, you must configure a local username and password.
Note. The authentication method none you can specify for administrative access is
different from the fallthru authentication type None, which applies only to network access.
The authentication method none allows access to the WSS by an administrator. The
fallthru authentication type None denies access to a network user. (For information about
the fallthru authentication types, see “Authentication algorithm” on page 543.)