Nortel Networks NN47250-500 Administrative Web-based AAA configuration scenarios

86 Configuring Web-based AAA for administrative and local access
NN47250-500 (Version 03.01)
You can also specify a filename for the configuration—for example, configday. To do this, type the following command:
WSS# save config configday
Configuration saved to configday.
You must type the save config command to save all configuration changes since the last time you rebooted the WSS or
saved the configuration. If the WSS is rebooted before you have saved the configuration, all changes are lost.
You can also type the load config command, which reloads the WSS to the last saved configuration or loads a particular
configuration filename. (For more information, see “Managing configuration files” on page 750.)
Administrative Web-based AAA configuration scenarios
The following scenarios illustrate typical configurations for administrative and local authentication. For all scenarios,
the administrator is Natasha with the password m@Jor. (For RADIUS server configuration details, see “Configuring
communication with RADIUS” on page 633.)
•“Local authentication” on page 87
•“Local authentication for console users and RADIUS authentication for Telnet users” on page 88
•“Local override and backup local authentication” on page 89
•“Authentication when RADIUS servers do not respond” on page 90