Nortel Networks NN47250-500 Configuring Auto-RF

391
Nortel WLAN—Security Switch 2300 Series Configuration Guide
Configuring Auto-RF
Auto-RF overview
The Auto-RF feature dynamically assigns channel and power settings to AP radios, and adjusts those settings when
needed. Auto-RF can perform the following tasks:
• Assign initial channel and power settings when an AP radio is started.
• Periodically assess the RF environment and change the channel or power settings if needed.
By default, Auto-RF is enabled for channel configuration and disabled for power configuration.
Auto-RF overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391
Changing Auto-RF settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 396
Locking down tuned settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
Displaying Auto-RF information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Note. Auto-RF of channels on 802.11a radios uses only the bottom eight channels in the
band (36, 40, 44, 48, 52, 56, 60, and 64). To use a higher channel number, you must
disable Auto-RF of channels on the radio profile the radio is in, and statically configure the
channel.