Nortel Networks NN47250-500 Locking down tuned settings

398 Configuring Auto-RF
NN47250-500 (Version 03.01)
Changing power tuning settings
Enabling power tuning
Auto-RF for power is disabled by default. To enable or disable the feature for all radios in a radio profile, use
the following command:
set radio-profile name auto-tune power-config {enable | disable}
To enable power tuning for radios in the rp2 radio profile, type the following command:
WSS# set radio-profile rp2 auto-tune power-config enable
success: change accepted.
Changing the power tuning interval
The default power tuning interval is 300 seconds. You can change the interval to a value from 1 to 65535
seconds. To change the power tuning interval, use the following command:
set radio-profile name auto-tune power-interval seconds
To set the power tuning interval for radios in radio profile rp2 to 240 seconds, type the following command:
WSS# set radio-profile rp2 auto-tune power-interval 240
success: change accepted.
Changing the maximum default power allowed on a radio
By default, the maximum power level that Auto-RF can set on a radio is the same as the maximum power level
allowed for the country of operation. To change the maximum power level that Auto-RF can assign, use the
following command:
set {ap port-list | ap ap-num} radio {1 | 2} auto-tune max-power power-level
The power-level can be a value from 1 to 20.
To set the maximum power that Auto-RF can set on radio 1 on the AP on port 7 to 12 dBm, type the following
command.
WSS# set ap 7 radio 1 auto-tune max-power 12
success: change accepted.
Locking down tuned settings
You can convert dynamically assigned channels and power settings into statically configured settings, by
locking them down. When you lock down channel or power settings, WSS Software converts the latest values
set by Auto-RF into static settings.