1001rp server description | Standard 1.0 |
Slot assignments
Introduction
The slot assignment tables show the following:
the physical location of boards inside the server, relative to other boards
the order in which boards are installed (for example, board #1, 2, 3, and so on)
how the boards are represented in some CallPilot Manager applications
Ñ(such as the Maintenance Administration page)
the maximum capacity for each switch connectivity
Note: Your server may vary depending on what was ordered from Nortel Networks. Therefore, your server may not have all of the slots populated.
Slot definition and slot numbering
In these tables, the term “slot” refers to the available slot openings in the chassis, not the PCI or ISA connectors inside the server.
Look at the server from the rear (see “Rear panel diagram” on page 12). The slots are numbered from right to left, 1 to 20. Now, look at the server from the front. The slots are numbered from left to right.
1001rp slot assignments
| CallPilot- |
|
|
Slot | assigned board |
|
|
number | labela | Meridian 1 | Succession CSE 1000 |
|
|
|
|
Slot 1 | BRD01 | Not used | Not used |
|
|
|
|
Slot 2 | BRD02 | Not used | Not used |
14 | CallPilot |
