May 2003 | Preparing for installation |
Removing the front bezel and server cover
Introduction
To access the server interior, you must remove both the front bezel and the server cover.
To remove the front bezel, see page 32.
To remove the server cover, see page 33.
To replace the front bezel, see page 34.
About the front bezel doors
Two locked doors on the front of the server cover the front panel, including the
These doors are part of the front bezel, which covers the front of the server. You must unlock the front bezel doors before you can remove the front bezel.
Part 2: 1001rp Server Hardware Installation | 31 |
