Nortel Networks 555-7101-217, P0605618 manual Preparing the modem, Required equipment

May 2003 Installing the server and connecting the peripheral devices

Preparing the modem

Introduction

You require a modem to support remote dial-up access to the CallPilot server. The modem also enables Nortel Networks technical support to connect to your CallPilot server for troubleshooting purposes. Nortel Networks connects to your server only when you request technical assistance.

Required equipment

ÑTo install the modem, you need the following equipment:

an analog external modem that includes

an RJ-11 analog phone cord

a power adapter cord

One of the following modems may have been provided with your server:

ÑU.S. Robotics 33.6 Kbps modem (NTRH9016)

ÑU.S. Robotics 56 Kbps modem (NTRH9078)

a 25-pin male to 9-pin female shielded serial cable for your modem

Note: Ensure that you have the correct cable for your modem, as follows:

Ñ33.6 Kbps modem: A0601464

56 Kbps modem: A0841984

Ñan analog line jack

tweezers, or a screw driver small enough to use to adjust the DIP switches

Part 2: 1001rp Server Hardware Installation 55