May 2003 | Installing the server and connecting the peripheral devices |
To set the modem DIP switches
Use a pair of tweezers or a small screw driver to set the DIP switches as described in the “Change to” column of the following table:
Note: ON is down. OFF is up.
DIP | Default | Change |
|
switch | setting | to | Function |
|
|
|
|
1 | OFF | OFF | DataÑTerminal Ready (DTR) override |
|
|
| OFF: Normal DTR operations. (The |
|
|
| computer must provide a DTR signal for the |
|
|
| modem to accept commands. If DTR is |
|
|
| dropped, the call is terminated.) |
|
|
| ON: The modem ignores DTR (override). |
|
|
|
|
2 | OFF | OFF | Verbal/numeric result codes |
|
|
| OFF: Verbal (word) results. |
|
|
| ON: Numeric results. |
|
|
|
|
3 | ON | ON | Result code display |
|
|
| OFF: Suppresses result codes. |
|
|
| ON: Enables result codes. |
|
|
|
|
4 | OFF | OFF | Command mode local echo suppression |
|
|
| OFF: Displays keyboard commands. |
|
|
| ON: Suppresses echo. |
|
|
|
|
5 | ON | ON | Auto answer suppression |
OFF: The modem answers on the first ring,
Ñor higher if specified in NVRAM. ON: Disables auto answer.
Part 2: 1001rp Server Hardware Installation | 57 |
