May 2003 | Installing the server and connecting the peripheral devices |
However, if you choose to establish a direct
5At the switch, connect the ELAN network cable to an MAU (Ethernet) transceiver. Then complete the connection from the transceiver to the switch.
DANGER
Risk of fire hazard
MAU model NTRH9069 is not suitable for installation in ducts, plenums, or other spaces used for environmental air. Do not install it above a false ceiling or below a raised floor, unless it can be confirmed that these spaces are not used to convey environmental air.
What’s next?
IF the server will | THEN |
|
|
be connected to a CLAN | continue with page 64. |
|
|
not be connected to a CLAN | continue with installing the software |
| feature key adapter (dongle). See page |
| 66. |
|
|
Part 2: 1001rp Server Hardware Installation | 63 |
