Setup Track, Distance, Time | NorthStar Navigation EXPLORER 657

17-6 Setup > Track

Press

twice, then select Track:

Plotting Interval

Select the plotting and recording interval. The options are Distance or Time.

Distance

Select the distance plotting interval: 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0 or 10.0 distance units.

Time

Select the time plotting interval: 1, 5, 10 or 30 seconds or 1 minute.

Tracking records and displays the boat’s course on the chart (see section 3-5). Five different tracks can be recorded: track 1 has up to 2000 points and tracks 2, 3, 4 and 5 have up to 500 points each.

Record

Off: The 657 stops recording a track.

1to 5 (select a track number): The 657 starts recording the boat’s course into the selected track.

Display

Off: No track is shown on the chart.

1to 5 (select a track number): The selected track is shown on the chart.

Memory used

The percentage of memory used in the track being recorded.

Tip: Use the user card window to check the number of points recorded in each track (see section 14).

Send track

This option is included for compatibility with older units. For information, see your Northstar dealer.

Delete track

The data in the track selected for Record (see above) is deleted.

68	Northstar Explorer 657 Installation and Operation Manual

Image 68

NorthStar Navigation EXPLORER 657 Setup Track, Distance, Time, Record, Display, Memory used, Send track, Delete track

Contents

Explorer Possible injury or death Could result in death or serious injuryCould result in minor or moderate injury DamagePage Contents Tides window User card window 15 AIS Installation Northstar petrol/gasoline sensors Installation Other Nmea instruments Introduction Cleaning and maintenance OverviewPlug-in cards 657 can use two kinds of plug-in card Changing the plug-in card Removing the display unitTurn the display unit off see -2 and put the dust cover on Replacing the display unit Using the keys Using the menusBasic Operation Overview of the keys Turning on and off / auto power Turning on manually Turning off manually Backlight and night mode Night modeTo cancel MOB or set another MOB Man overboard MOB 657 has user settable alarms see section AlarmsSimulate mode Main windows Page Multi window displays Favorite displays Selecting a favorite displayAdding a favorite display to the list Deleting a favorite display from the list Setting the data header for a display Data headerCompass Displays can show data at the top, called the data header Navigation Chart Going to a waypoint or to a point on the chartIntroduction to navigating Navigating to a point Starting a route from the chart window Cancelling a routePreparing Starting a route from the routes window Chart window To go to the Chart window, press then select ChartTypical chart window shows Land Sea Cursor see section Typical waypoint see section Chart modes Chart scaleChart symbols and information Latitude and longitude Finding a chart symbol Perspective viewDistance and bearing calculator Projected course Navigation Highway window Tracks and trackingTime intervals Interval Track Track 2, 3, 4 or Interval Track Track 2, 3, 4 or Navigation Waypoints Waypoints window Displaying a waypoint on the chart Managing waypointsCreating a new waypoint Moving a waypoint Navigation Routes Deleting all waypointsChanging a waypoint’s data Sort Waypoints Creating a new route from the chart window Routes windowManaging routes Creating a new route Displaying a route on the chart Editing a route from the chartEditing a route Creating a new route from the routes window Satellites Using Sonar fishfinding IntroductionSatellite window Satellite window shows Interpreting the display Strength of echoes Bottom types Frequency and cone widthWater Depth When to use 50 kHz When to use 200 kHzShadows Example of shadows When to use Mixed When to use 50/200 kHz KHz display 200/50 Khz display Mixed display Minute ago Seconds ago Now Fish arches Fish detection and display Where to find fishFish symbols Range 657 has two range modesAuto Zoom range and offset Changing mode Gain and thresholdGain window This display is called the gain window Sonar fishfinding Displays Sonar history display no split Extended history mode Sonar Zoom and Full Screen Zoom displaysScreen. Press to return to the most recent echo History position bar Sonar Bottom display Sonar 50/200 display Setting gain and threshold Sonar A-Scope displayFish recognition Bottom type Gauges window Data windowSelecting a Gauges layout Changing a gauge layout Fuel functions and display What the fuel computer doesFuel window Fuel window shows When you add or remove fuel Boat speed sensors Low fuel alarmWhen you remove fuel Speed Log Economy Water speed and ground speedSpeed Log Economy Range Fuel consumption curves Making a curveStart running the boat in a straight line Press twice, then select Fuel Using a curve Renaming a curveDeleting a curve Selecting a curve To the reading of the fuel dispenser’s gauge Then press Setup enginesCalibration Tides window shows data for the chosen date Choosing the date of the tide chartTides window Saving data to the user card User card windowUser card window has 15 AIS Deleting a file from the user cardSorting the file names Rereading the file information Viewing AIS Vessels Safety msgs rx AIS WindowsVessels Displaying Full AIS Details 16 DSC/Buddy track windows Displays Distress Poll Using the displays Displaying a boat on the chart Boat positionsCreating a waypoint Deleting a boat Setting up Time see Favorites see 17-14 Simulate see Setup option menusSmartCraft Setup System Auto power offFactory reset Language Setup Chart Setting map datumRotation Palette Nmea datum offset Map shiftApplying a map shift Map shift Lat/lon grid Setup Sonar Pulse powerFrequency Digit size Setup GPS Setup FuelGPS Source Dgps Source Setup engines Setup tanksSource Num engines Setup Track DistanceTime Record Setup AIS Show Dangerous Only Setup LogsReset total dist Reset engine hours Setup Alarms Symbol AlarmArrival radius Anchor alarm Alarm sounds when it is on Setup Units TemperatureSetup Comms Fuel Setup Calibrate Temperature filterSpeed Speed filter Setup Time Setup FavoritesKeel Offset Speed range Installation Setup SimulateSimulate Mode Installation What comes with Installation Options and AccessoriesOptional sensors and instruments GPS or Dgps antenna For GPS navigation see section Power/data cable Pin Wire FunctionConnections Display unit 18-3 Black Yellow Blue Installation The display unit Flush MountingBracket Mounting There are two mounting arrangements Installation Power/data cable Basic powerBlack Power/data cable Red Yellow Fuse 2A Auto power Dgps Source Installation GPS antenna Selecting an antennaInstalling an antenna Blue Sonar cable Either Installation Sonar transducerInstallation Northstar petrol/gasoline sensors NavBus Installation SmartCraftInstallation Other NavBus instruments Installation Northstar VHF radio Installation Other Nmea instruments Installation Setup and test Enter setup data to set up the 657 to yourIf the display unit is bracket mounted, adjust Tilt and rotation for best viewing and hand Appendix a Specifications South American List of datumsAdindan Afgooye Appendix B Troubleshooting General problems GPS navigation problems Fuel consumption problems Sonar fishfinding problems Twin engine installation shows only one flow rateErratic Fuel Flow readings There is no reading for fuel economy There is a double bottom trace displayed Bottom is not displayedBottom is displayed too far up the screen Appendix C Glossary and navigation data Glossary Navigation data TBMFT!COUNBSJOFDPN