Setting time and date [Time & Date]
Notes
•If you press the `OK button during the setup operation, the recorder will save the items that were set to that point.
•After setup, a message will sound saying that If the guidance is not required, select [Off], and the screen goes into [Voice Guide] (☞ P.72) setup. If you don’t want the guidance feature, select [Off].
Changing the time and date
While the recorder is during stop mode, press and hold the STOP (4) button to display the [Time & Date] and [Remain]. If the current time and date is not correct, set it using the procedure below.
MENU/SCENE button
F2 button
+ − button `OK button
1While the recorder is during stop mode, press the MENU/SCENE button.
•The menu will appear on the display (☞ P.48).
2Press the + or − button to select [Device Menu] tab.
•You can change the menu display by moving the settings tab cursor.
1
| Press the `OK button to move | Setting | |
3 | |||
time | |||
| the cursor to the item to set. | ||
|
| ||
| • [Device Menu] will appear on the | and | |
| display. | ||
| date | ||
4 | Press the + or − button to select | ||
| |||
| [Time & Date]. |
|
5Press the `OK button.
•[Time & Date] will appear on the display.
•The “Hour” will flash on the display, indicating the start of the Time and Date setup process.
The following steps are the same as Step 1 through Step 3 of “Setting time and date [Time & Date]” (☞ P.22).
6 | Press the F2 (EXIT) button to | EN |
| close the menu screen. | 23 |
|
|
