Olympus LS-7 manual Adjust the voice sync level, Select On or Off, Sets the detection time

Menu setting method

4

Menu setting method

V-Sync. Rec

Voice sync recording starts when a voice louder than the voice sync level (detection level) is detected. When the voice becomes low, recording will automatically stop. When voice sync recording is on and the input level falls below the voice sync level (detection level) for a period of at least the specified detection time, the recorder will return to the standby mode.

1Select [On] or [Off].

[On]: Enables the Voice sync recording function.

[Off]: Disables this function.

•If you select [On], proceed to the operation of Step 2.

2Sets the detection time.

[1 second] [2 seconds] [3 seconds]

[4 seconds] [5 seconds] [10 seconds]: If the input (recording level) is equal to or below the specified level for longer than the specified detection time, the recorder will return to the standby mode.

Adjust the voice sync level:

1Press the REC (s) button to start recording.

•To use voice sync recording, set

[V-Sync. Rec] to [On] and specify a detection time.

2Press the 9or 0button to adjust the voice sync level.

•The voice sync level can be set to any of 23 different values.

•The higher the value, the more sensitive the recorder will be to sounds. At the highest value, even the faintest sound will activate recording.

a

aVoice sync level (moves to the right/left according to the set level)

3Press the REC (s) button again.

•The recorder will go into standby. [Standby] will flash on the display and the recording indicator light will flash.

•When the input is at or above the voice sync level, recording will start automatically.

4Voice sync recording stops automatically.

•If sound at a volume below the voice sync level continues for the specified time, voice sync recording will end automatically, and the recorder will return to the standby mode of Step 3. Every time the recorder enters standby mode, the file will be closed and recording will continue in a different file.

•To stop the recorder during voice sync recording, press the STOP (4) button.

•When using the [V-Sync. Rec] function, the following functions are not available.

•[VCVA] (☞ P.53)

•[Pre-Recording] (☞ P.56)

Timer Rec

See “Timer recording [Timer Rec]” (☞ P.67).

EN

54