Recording
2
Recording
•When the external stereo microphone is used while [Rec Mode] is set to a monaural recording mode, it enables recording only with the L channel microphone (☞ P.51).
Recording the sound of other devices with this recorder:
The sound can be recorded when connecting to the audio output terminal (earphone jack) of the other device and the MIC jack of the recorder with the connecting cord KA333 (optional) for dubbing.
|
| To audio output |
To MIC jack |
| terminal of other |
|
| devices |
|
|
|
Note
•If you are unable to produce a clear recording with this recorder even after adjusting the recording level (☞ P.51), this could potentially be because the output level for the connected devices is too high or too low. When external devices are connected, perform a test recording and then adjust the output level for the external devices.
Recording the sound of this recorder with other devices:
The sound of this recorder can be recorded to other devices when connecting the audio input terminal (microphone jack) of other devices and the EAR jack of this recorder, with the connecting cord KA333 (optional).
To EAR jack
To audio input terminal of other devices
Note
•When you adjust the various sound quality settings related to playback on the recorder, the audio output signal sent out from the EAR jack will change as well (☞ P.57, P.59).
EN
36
