Menu setting method
When you select [1file]:
1Press the + or − button to select the file you want to move or copy.
2Press the `OK button to select the file.
When you select [Selected files]:
1Press the + or − button to select the file you want to move or copy.
2Press the `OK button to check the file(s) selected.
3Repeat steps 1and 2until all the files you want to move/copy are selected then press the F2 (GO) button.
When you select [All files]:
When all files are selected, all the files in the folder will be automatically selected and the recorder will move to the [Folder to move] screen.
7Press the 9, 0or + , − button to select the folder you want to move or copy the file to.
8Press the F2 (GO) button.
•File move or file copy will start if [Moving!] or [Copying!] appears on the display. During the process, the progress status will be shown in percentage. The process is completed when [File move completed] or [File copy completed] is displayed.
Notes
•The recorder cannot copy when the memory capacity is not sufficient.
•The recorder cannot move or copy when the number of files exceeds 200.
•Do not remove the batteries during moving or copying. This may damage the data.
•A file cannot be moved or copied to the same folder.
•When the operation is canceled during moving or copying, only the file that is being moved or copied is effective, all other files will not be moved or copied.
•Files which are locked will remain so even after they are moved or copied.
•DRM files cannot be moved or copied.
•Files cannot be moved or copied directly under the [Recorder] folder.
4
Menu setting method
EN
65
