Inserting and ejecting a microSD card | Olympus LS-7 manual

Inserting and ejecting a microSD card

Notes

•It is possible to switch the recording media over to the built-in memory (☞ P.61).

•In some cases microSD cards which have been formatted (initialized) by another device, such as a computer, may not be recognized. Be sure to format microSD cards with this recorder before using them (☞ P.74).

Ejecting a microSD card

1While the recorder is during stop mode, open the card cover.

2Push the microSD card inward to unlock it, and let it eject partially.

•The microSD card is visibly out of the slot and can be removed safely.

•If you eject the microSD card when [Memory Select] is set to [microSD Card], it will be automatically changed to [Built-in Memory Selected].

3Close the card cover securely.

Notes

•Releasing your finger quickly after pushing the microSD card inward may cause it to eject forcefully out of the slot.

•Check the Olympus website regarding microSD cards which are confirmed operation with this recorder.

•This recorder may not recognize correctly on some microSD cards which are not compatible with this recorder.

•In the case when the microSD card cannot be recognized, remove the microSD card then put it in again to see if this recorder recognizes the microSD card.

•The processing performance reduces in a microSD card when you repeat writing and deleting. In this case, format the microSD card (☞ P.74).

1

Inserting and ejecting a microSD card

EN

25

Image 25

Olympus LS-7 manual Inserting and ejecting a microSD card, Ejecting a microSD card

Contents

LS-7 Trademarks and registered trademarks Introduction Table of contents Safety precautions Handling the recorder Safety precautionsBe careful with the strap Keep young children and infants away from the recorder Keep battery out of the reach of children Battery handling precautions Safety precautions Getting started Main features Main features Main features Checking the contents of the box Peak indicator light LED LED indicator light LED = POWER/HOLD switch QBattery cover wUSB connectorIdentification of parts 1Recording media indicator Recorder mode displayDisplay LCD panel Identification of parts 1Recording media indicator Music mode display# Playback position bar indicator $Icon display P.14 Identification of parts Identification of parts Icon displayFor all modes Close the battery cover Power supplyInserting batteries Direction B Setting Battery settingsComplete the setting Recorder P.15 Charging by connecting to a computer via USB Power supply Plug the recorder’s USB cable Adapter optional to chargeInto the AC adapter Plug the AC adapter into AC outlet Batteries Operating temperatureDischarging Storage for a long period -20C 30C/ -4F 86F Turning on the power Turning on/off the powerTurning off the power Power save mode Set the recorder to Hold mode Exit Hold mode Slide the POWER/HOLD switch toSlide the POWER/HOLD switch to Hold position Aposition Press the 9or 0button to Select the item to set Setting time and date Time & Date Changing the time and date Setting time and date Time & Date Inserting a microSD card Inserting and ejecting a microSD cardInserting and ejecting a microSD card Close the card cover securely Ejecting a microSD card Inserting and ejecting a microSD card Home display operations Press the + or − button to select the modePress the List button repeatedly to set the Home display About the folders for voice recordings Folders About the folder for music playbackFirst layer Second layer FolderFile Selecting the folders and files Press the REC s button to start recording RecordingSelect the recording folder Press the REC s button to prepare recording Press the Stop 4 button to Stop recording RecordingRecording It is possible to record exceeding 2GB To quickly check on the recorded contents Settings relating to RecordingPress the REC s button again Pause Connect the earphone to the EAR jack on the recorder Changing the recording scene Rec ScenePress the + or − button to select Rec Scene Recording Listening while audio is recorded Recording Recommended settings Recommended settings by recording conditionLS7 0001 .MP3 Condition Applicable external microphones optional P.96 Recording from external microphone or other devices Recording the sound of this recorder with other devices Recording the sound of other devices with this recorder Playback Volume can be adjusted within aRange from 00 to Stop 4 button + − button `OK button Playback Settings relating to playbackPlayback through earphone Hold the 9button Hold the 0button While While the recorder is during 9buttonPlayback mode, press While the recorder is during stop Changing the playback speed Noise Cancel P.57About the limits of fast playback Clearing an index mark or a temp mark Setting an index mark or a temp markF2 Index button 90button Erase button Repeat playback How to begin segment repeat playbackF1 A-B button Changing the playback scene Play Scene Canceling the segment repeat playback FunctionBPress the Stop 4 button CPress the 9button Erasing files ErasingErasing a folder Partially erasing a file ErasingPlay the file you want to partially erase Press the Erase button When Partial erase completed. is Menu setting method Menu setting methodPress the + or − button to change the setting Setting menu during recording Menu setting methodSetting menu during playback Close the menu screen Rec Menu + File Menu Select the recording format Adjust the recording levelSelect the recording rate Select Manual or Auto Zoom Mic About the Zoom Mic functionLow Cut Filter 300Hz Select On/Off or Standby Sets the Vcva function Adjust the start/stop actuation level Press the 9or 0button to adjust the voice sync level Adjust the voice sync levelSelect On or Off Sets the detection time When Scene Select is selected Select a recording scene When Scene Save is selectedSet the recording settings according to your preferences Select Scene Select or Scene Save Plug-inPower How to enable pre-recordingPress the REC s button Pre-Recording Play Menu Noise CancelVoice Filter Forward/Reverse Skip Playback Select the desired playback mode Select Repeat or RandomSelect Forward Skip or Reverse Skip Set the skip space Set the playback settings according to your preferences When Scene Select is selected Select a playback scenePlay Scene Reverb LCD/Sound Menu Select Lighting Time or Brightness Select the setting Device Menu Menu settings after resetting initial settings Format System InfoMemory Info Press the F2 Exit button to close the menu screen Rearranging files ReplacePress the + or − button to select the file you want to move F2 button + − button `OK button Moving/Copying files File Move/Copy Press the `OK button to move to the respective setting When you select Selected files When you select 1fileWhen you select All files Press the F2 GO button Dividing files File Divide Press the F2 Exit button to complete the settingStop playback at the divide position Press the + button to select Start Press the `OK button Select Timer Rec from the menu on the Rec Menu Timer recording Timer RecOn/Off setting Day setting Rec Mode setting Time settingFolder setting Mic Sense setting Select Alarm from the menu on the Play Menu Alarm playback function AlarmVolume, Alarm Sound and Playback File Start Time setting Press the `OK button to move to the respective settingVolume setting Alarm Sound setting Select the folder using the + or Guidance Voice Guide Speed settingSelect Voice Guide from the menu in LCD/Sound Menu Select USB Settings from the menu on the Device Menu Changing the USB class USB SettingsWhen USB Connect is selected When USB Class is selected Method Select Format from the menu on the Device Menu Formatting the recorder Format Menu Setting method Method Setting Windows Operating environment Operating environment Precautions on using the recorder connected to a PCMacintosh Operating System Display Functions available in the Olympus Sonority Using Olympus SonoritySonority Installing software Using Olympus Sonority Using Olympus Sonority Changing the Installation Destination Using Olympus Sonority Uninstalling softwareExit Olympus Sonority Select Control Panel from Start menu Exit Olympus Sonority Connect the recorder to a PC Copying voice guide dataStart Olympus Sonority Copy voice guide data Start the Olympus Sonority Upgrade functionOr click the button in the Tool Bar Select Purchase Olympus Sonority Plus in the Help Menu Functions available with the music editing plug-in Functions available in the Olympus Sonority Plus Search by contents Using online helpSearch by keyword Connecting to your PC Connecting to your PCWindows Macintosh Disconnecting from your PC Connecting to your PCData will be destroyed Transfer the voice files to your PC Using as external memory of the PC Using as external memory of the PC Alarm message list Alarm message listMessage Meaning Explanation Action System file. Connect Can’t makeTo PC and delete Unnecessary file Symptom Probable cause Action TroubleshootingTroubleshooting Troubleshooting Symptom Probable cause Action Troubleshooting Marks, temp marks Unable to set indexCannot recharge Recorder Accessories optional Specifications During recording mode Built-in microphone SpecificationsDuring playback mode During recording mode Microphone jack Recording mode Built-in stereo microphone Earphone playback Guide to battery lifeDuring playback mode Alkaline batteries Linear PCM format 100MP3 format WMA format Linear PCM format 101 Declaration of Conformity Technical assistance and supportCanadian RFI Olympus Imaging Corp