Menu setting method
VCVA
When the microphone senses that sounds have reached a preset threshold volume level, the
1Select [On/Off] or [Standby].
2Sets the VCVA function.
When [On/Off] is selected: [On]:
Enables the VCVA function. Will start recording in VCVA mode.
[Off]:
Disables this function. Will resume recording in normal mode.
When [Standby] is selected:
[On]: With this setting, the recording monitor (earphone output) is disabled during VCVA standby
(☞ P.33), which allows you to confirm VCVA actuation status by the earphone output.
[Off]: The audio signal is always output from the earphone jack.
Adjust the start/stop actuation level:
1Press the REC (s) button to start recording.
•When the sound volume is lower than the preset threshold sound level, recording automatically stops after
1 sec approximately, and [Standby] flashes on the display. The recording indicator light glows when recording starts and flashes when recording pauses.
2Press the 9or 0button to adjust the start/stop actuation level.
•The VCVA level can be set to any of 23 different values.
•The higher the value, the more sensitive the recorder will be to sounds. At the highest value, even the faintest sound will activate recording.
a b
4
| aLevel meter (varies according to the | Menu | |
| sound volume being recorded) | ||
|
| ||
| bStart level (moves to the right/left |
| |
| according to the set level) | setting | |
• When using the [VCVA] function, the | |||
| |||
following functions are not available. |
| ||
• | method | ||
• |
| ||
| |||
• When [Rec Monitor] is set to [Off], the [Standby] function is disabled (☞ P.55).
• If the start/stop actuation level is not adjusted within 2 seconds, the display will return to the previous one.
• If the surrounding noise is loud, the start/ stop actuation sensitivity of the VCVA can be adjusted according to the recording situation.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is recommended.
EN
53
