Recording
4Press the STOP (4) button to
stop recording.
• [L] will appear on the display.
f
fFile length
Notes
•To ensure that you do not lose the beginning of the recording, confirm that the recording is activated by checking the recording indicator or the mode indicator in the display.
•When remaining recording time is less than 60 seconds, the LED indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
•[Folder Full] will appear when the recording cannot be made any further. Select other folder or delete any unnecessary files before recording (☞ P.45).
•[Memory Full] will appear when the memory is full. Delete any unnecessary files before recording any further
(☞ P.45).
•When a microSD card is inserted in the recorder, be sure to confirm the recording media as either
or [microSD Card] so that there is no mistake (☞ P.61).
•If the REC (s) button is pressed when a function other than the record function is specified, [Cannot record in this folder] is displayed. Select a folder from [Folder A] through [Folder E] and start recording again.
•We recommend formatting the record media in the recorder before recording (☞ P.74).
It is possible to record exceeding 2GB:
The recording will continue even if the volume of a single file exceeds 2 GB in the linear PCM format recording.
•The file is saved every 2 GB in separate files. It will be treated as multiple files when playing back.
•When the recording exceeds 2 GB, the number of files in the folder may exceed 200 files. The 201st file and later will not be recognized by the recorder, so check by connecting the recorder to a PC.
2
Recording
EN
31
