Interface Parameters

If your data acquisition device interface is set up for Network (ethernet), you should change the device interface to RS-232 serial communications prior to performing calibration. Refer to your hardware setup chapter as needed.

1.a Select the DIP Switch toolbar icon to activate the Select & Verify Interface Setup window. This allows you to select and setup the communication interface used for your scanning system.

Select & Verify Interface Setup

1.b Choose the desired interface by clicking the top pull-down triangle (τ) and then selecting the applicable interface from the expanded interface list.

1.c Select the DIP switch image that represents your instrument’s DIP switch overlay.

1.d Click the Verify box to make sure the settings are correct.

The Calibration Enable/Disable pushbutton (located on the main unit chassis rear panel) must be in the indent (enable position) in order to calibrate the main chassis.

Early production ChartScan units (units that have no calibration pushbutton) must have DIP switch #9 in the 1 (up) position.

After completing the prompt instructions, you can save the calibration settings by selecting the Save Interface Parameters selection (from the File pull-down menu or toolbar). The settings and constants will be stored in a file with a .CAL extension.

System Inventory

2.Select the Inventory icon from the toolbar to generate a list of items that make up your scanning system.

3.Select the items you wish to calibrate.

Calibration

4.Select the Calibration icon from the toolbar to initiate the automatic calibration process. The ScanCal program will prompt you through the calibration. Be ready to supply the corresponding passwords when prompted by ScanCal.

ScanCal contains a feature that allows you to view the calibration steps without performing an actual calibration. This is accomplished by using the Skip this Step button to skip a procedural step(s). When using this feature the existing calibration settings will not change.

6-4 Calibration

ChartScan User’s Manual

Page 107 Page 109
Page 108
Image 108
Omega Vehicle Security 1400 manual Interface Parameters, System Inventory
Page 107 Page 109

1400 specifications

The Omega Vehicle Security 1400 stands out as a premier solution for vehicle protection, offering a blend of advanced technology and user-friendly features. With the increasing rise of vehicle thefts, incorporating a robust security system has become essential for vehicle owners. The Omega 1400 aims to address these concerns effectively, ensuring peace of mind for users.

One of the key features of the Omega Vehicle Security 1400 is its sophisticated alarm system. The device is equipped with a motion sensor that activates the alarm when unauthorized movement is detected. This feature provides an added layer of protection, alerting owners to potential threats even when they are away from their vehicles. Additionally, the system comes with multiple sensors that monitor doors and trunk openings, fortifying security against tampering.

A standout component of the Omega 1400 is its remote control functionality, which allows users to arm and disarm the alarm with ease. Featuring a user-friendly remote, drivers can secure their vehicles from a distance, ensuring convenience and accessibility. The remote not only operates the alarm system but also integrates a panic button, which can be used in emergency situations to deter potential threats.

The Omega Vehicle Security 1400 is also designed with cutting-edge technology, offering compatibility with smartphone applications. This innovation enables users to monitor their vehicles in real-time, providing alerts directly to their mobile devices. Users can check the status of their vehicle, adjust settings, and receive notifications if the alarm is triggered, ensuring they are always connected to their vehicle's security.

Another remarkable characteristic of the Omega 1400 is its built-in GPS tracking capability. In the unfortunate event of a theft, the GPS feature allows vehicle owners to track the location of their vehicle, increasing the chances of recovery. This technology proves invaluable for users who prioritize the safety of their assets.

Additionally, the Omega Vehicle Security 1400 supports a robust battery backup system. This ensures that the alarm remains functional even if the vehicle's power supply is compromised. The reliability and durability of this security system make it a worthy investment for anyone looking to safeguard their vehicle.

In summary, the Omega Vehicle Security 1400 brings together advanced alarm technologies, remote access, GPS tracking, and reliable power support, creating a comprehensive security solution tailored for modern vehicle owners. Each feature has been designed with user convenience and vehicle protection in mind, making it a top choice in the vehicle security landscape.
Top Page Image Contents