5Operating the Pump Motor in the STOPPED Display Mode
RPM |
Display shows |
xxx rpm |
ACTION |
Displays current |
RPM setting |
FLOW |
RATE |
Display shows |
xxx mL/min |
ACTION |
Displays current |
FLOW RATE setting |
TIME |
Display shows |
xx:xx:xx |
ACTION |
Displays current |
TIME setting |
The flashing group (SECONDS, MINUTES, or HOURS) is the one that will scroll when the UP or DOWN ARROW key is pressed. Pressing the TIME key again will select a different group.
TOTAL |
VOLUME |
Display shows |
xxx mL or xxx Liters |
ACTION |
Displays current |
TOTAL VOLUME |
setting |
Using the UP ARROW key () will cause the RPM setting to scroll up to 600 rpm then roll over to 10 rpm.
OR
Using the DOWN ARROW key () will cause the RPM setting to scroll down to 10 rpm then roll over to 600 rpm.
Using the UP ARROW key () will cause the FLOW RATE value to scroll up to the maximum FLOW RATE determined by TUBE ID then scrolls over to the minimum FLOW RATE.
OR
Using the DOWN ARROW key () will cause the FLOW RATE value to scroll
down to the minimum FLOW RATE determined by TUBE ID then scrolls over to the maximum FLOW RATE.
Using the UP ARROW key () will cause the flashing TIME setting to scroll up to maximum then roll over to “0”. The maximum time is 12 hours, 59 minutes and 59 seconds (12:59:59).
OR
Using the DOWN ARROW key () will cause the flashing TIME setting to scroll down to “0” then roll over to the maximum. The maximum time is 12 hours, 59 minutes and 59 seconds (12:59:59).
Using the UP ARROW key () will cause the display to scroll up to a maximum of 10000 liters then over to 1 mL.
OR
Using the DOWN ARROW key () will cause the display to scroll down to 1 mL then roll over to 10000 liters.
