9 Specifications
Maximum Fluid Back Pressure: | 20 PSI |
Max Suction Lift: | 20 feet of H2O (6.1 meters of H2O) |
Temperature Range (Fluid): | |
Flow Rate: | 1 to 2280 mL/min |
Motor: | Reversible, 75 W (1⁄10 HP), 90 Vdc (10 to |
| 600 rpm) |
Display: | 16 character dot matrix LCD, 9 mm (3⁄8") high |
| characters |
Power: | 90 to 130 Vac, 1.5 A; 190 to 260 Vac, 0.8 A |
| (Unit may be used with extension cord) |
Line cord: | 1.8 m (6 ft) with US standard plug on 115 Vac |
| units 1.8 m (6 ft) with European plug on |
| 230 Vac units |
Housing: | Painted sheet metal with rubber feet; units are |
| stackable |
Dimensions (H x W x D): | 152 x 254 x 254 mm (6" x 10" x 10") |
Weight: | 8.2 kg (18 lb) |
Fuse: | 2 amp, 110 Vac or 1 amp, 220 Vac |
|
| Table |
|
| |
|
|
|
|
|
|
Tubing Wall | Tubing Size | Calibration | Tubing Wall | Tubing Size | Calibration |
Thickness | Inner Diameter | Accuracy | Thickness | Inner Diameter | Accuracy |
1⁄16" | 1⁄32" | ±4% | 1.5 mm | 1.0 mm | ±4% |
|
|
|
|
|
|
1⁄16" | 1⁄16" | ±2% | 1.5 mm | 2.0 mm | ±2% |
|
|
|
|
|
|
1⁄16" | 1⁄8" | ±2% | 1.5 mm | 3.0 mm | ±2% |
|
|
|
|
|
|
1⁄16" | 3⁄16" | ±2% | 1.5 mm | 4.0 mm | ±2% |
|
|
|
|
|
|
1⁄16" | 1⁄4" | ±2% | 1.5 mm | 5.0 mm | ±2% |
|
|
|
|
|
|
1⁄16" | 5⁄16" | ±4% | 1.5 mm | 6.0 mm | ±2% |
|
|
|
|
|
|
|
|
| 1.5 mm | 7.0 mm | ±4% |
|
|
|
|
|
|
|
|
| 1.5 mm | 8.0 mm | ±4% |
|
|
|
|
|
|
NOTE
Calibration accuracy studies were done by calibrating the pump motor and comparing actual volume pumped to requested total volume. Various tube materials were used along with 20°C water, 0 PSI back pressure.
Accuracies may vary with fluid viscosity, temperature and back pressure.
