Omega Vehicle Security FPU5-MT-110 4cont’d, Total Volume Mode, Display, Action Taken, Shows, 6-20

Table 6-4 (cont’d)			TOTAL VOLUME MODE
KEY		DISPLAY	ACTION TAKEN
		SHOWS	AND PROCEDURE
		xxx mL/min	Displays actual FLOW RATE
FLOW
		or
RATE			Press the FLOW RATE key. The display flashes the calculated
		xxx L/min
			fluid flow rate (xxx mL/min or xxx L/min).
		xxx mL	Displays current TOTAL VOLUME setting
	TOTAL
	VOLUME	or
			1. Press the TOTAL VOLUME key. The display flashes the
		xxx Liters
			TOTAL VOLUME setting you selected just before starting
			the pump.

2.Use the UP and DOWN ARROW keys to enter the TOTAL VOLUME setting you desire. As you use the UP and DOWN ARROW keys, the display changes accordingly.

	TUBE ID=xxx	Displays current TUBE ID
TUBE ID
		Press the TUBE ID key. If the red LED next to the CALIBRATE
		key is not lit, the display flashes the current TUBE ID setting. If
		the red LED next to the CALIBRATE key is lit, the display flashes
		the message “CALIBRATED TUBE!”.

	CALIBRATED!	Displays calibration state
CALIBRATE
	or
	not calibrated	1. Press the CALIBRATE key. If the red LED next to the
		CALIBRATE key is not lit, the display shows “not
		calibrated”. If the red LED next to the CALIBRATE
		key is lit, the display shows “CALIBRATED!”.
		To calibrate a tube:

2.Press the START/STOP key to stop the pump. The display returns to the STOPPED Display Mode. For detailed instructions on “Calibrating a Tube”, refer to Section 5.5.

and 	xxx mL	NOTE: if you press the UP and DOWN ARROW keys, the display
		shows the current TOTAL VOLUME setting. This setting
	or
	xxx Liters	changes accordingly as you use the UP and DOWN
		ARROW keys.
Language		NOTE: if you press the Language button, the display changes
Button		to the next language in the sequence: English, French,
		Spanish, German, and Italian.

6-20