Operating the Pump Motor in the STOPPED Display Mode | 5 |
|
|
5.2 Defining the Direction of Pumping
INLET |
SELECT |
Display shows |
<no change> |
ACTION |
LEDs indicate new |
pump direction |
The INLET SELECT key, left and right pump icons, and green LEDs define the direction of pumping by specifying the tubing inlets and outlets.
1.Refer to Figure
2.To determine the direction of pumping, look at the left and right pump icons and green LEDs. Only one of each pair of LEDs is lit. The lit LED points to the tubing inlet.
NOTE
A top tubing inlet on the left pump corresponds to a bottom tubing inlet on the right pump and vice versa.
Two pumps stacked on one side of the motor will pump fluid in the same direction. Two pumps mounted on opposite sides of the motor will pump fluid in opposing directions.
