Omega Vehicle Security FPU5-MT-110 manual Operating the Pump Motor in the Running Display Mode

6Operating the Pump Motor in the RUNNING Display Mode

6.Once the display shows the TOTAL VOLUME setting you desire, press the START/STOP key. As the fluid begins to dispense, the non-flashing display shows the calculated volume of dispensed fluid, as it occurs in time.

NOTE

In the TOTAL VOLUME Mode, the pump stops running after it dispenses the TOTAL VOLUME requested.

To stop pumping before that time, press the START/STOP key. The pump stops running, and the display returns to the STOPPED DISPLAY Mode.

When the pump stops, the display shows the calculated volume of fluid dispensed.

Do not be alarmed if this number is slightly larger than the TOTAL VOLUME you requested. Since the pump motor can not stop instantaneously, this number includes any small amount of fluid that escapes while the pump is in the process of stopping.

Table 6-4 shows how other keys and buttons can be used while pumping in the TOTAL VOLUME mode.

6-18