![](/images/new-backgrounds/1203042/203042259x1.webp)
Replacing the Speaker Module
1.Place the left Speaker Module in the chassis as shown, ensuring that the locating pins are seated correctly.
3.Continue running the cable along the Upper Cover using all available cable clips.
2.Lift the mylar sheet away from the Upper Cover and run the Speaker cable along the Upper Cover using all available cable clips.
4.Place the right Speaker Module in the chassis as shown, ensuring that the locating pins are seated correctly.
5.Replace the four securing screws.
NOTE: Ensure that the Speaker cable runs as shown in the image below to avoid trapping when the Upper Cover is replaced.
120 | Chapter 3 |