![](/images/new-backgrounds/1203042/203042231x1.webp)
LCD Module Reassembly Procedure
Replacing the Antennas, Power Board, and MIC
1.Replace the left and right antennas as shown. Ensure that the locating pin on each antenna is correctly seated. Press down on the adhesive pads (green callout) to secure the antennas in place.
Locating Pin | Locating Pin |
2.Replace the left antenna cable (white) as shown. Ensure that the cable is inserted along the cable channel and secured under each adhesive tab strip.
106 | Chapter 3 |