Packard Bell LJ65 External Module Disassembly Process, External Modules Disassembly Flowchart

External Module Disassembly Process

IMPORTANT:The outside housing and color may vary from the mass produced model.

External Modules Disassembly Flowchart

The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.

Turn off system and peripherals power

Disconnect power and signal cables from system

Remove

Battery

Remove

Dummy Cards

Remove

Lower Covers

Remove

ODD

Remove

DIMMs

Remove

WLAN

Remove

Primary HDD

Remove

Secondary HDD

NOTE: Items enclosed with broken lines (— - - —) are optional and may not be present.

Screw List

Step		Screw		Quantity	Part No.
WLAN Module	M2*3		1		86.WBF02.003
ODD Module	M2.5*5		1		86.WBF02.010
ODD Bracket	M2*3		2		86.WBF02.003
Primary HDD Carrier	M3*3		4		86.WBF02.005
Secondary HDD Carrier	M3*3		4		86.WBF02.005

Chapter 3 51