Packard Bell LJ65 manual Emitm, Dts, Acpi S3

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter	Description		Submenu Items
Advanced CPU	Enter the Advanced CPU Control menu.	•	P-States (IST)
Control		•	Boot performance mode
		•	Thermal Mode
		•	CMP Support
		•	Use XD capability
		•	VT Support
		•	SMRR Support
		•	C-States
		•	Enhanced C-States
		• C-State Pop Up Mode
		• C-State Pop Down Mode
		• C4 Exit Timing Mode
		•	Deep C4
		•	Hard C4E
		•	Enable C6
		•	EMITM
		•	Bi-directional PROCHOT#
		•	Dynamic FSB Switching
		•	Turbmo Mode
		•	ACPI 3.0 T-States
		•	DTS
		•	DTS Calibration
		• Thermal Trip Points Setting
Platform Power	Enter the Platform Power Management	•	PCI Clock Run
Management	menu.
Break Event	Enter the Break Event menu	•	Storage Break Event
		•	PCIE Break Event
		•	PCI Break Event
		•	EHCI Break Event
		•	UHCI Break Event
		•	HDA Break Event
ACPI S3	Enable or Disable ACPI S1/S3 Sleep State.	N/A
Wake on PME	Disable or Enable wake up when the	N/A
	system power is off and a PCI Power
	Management Enable wake up event occurs.
Wake on Modem	Disable or Enable wake up when the	N/A
Ring	system power is off and a modem attached
	to the serial port is ringing.
Quickly S4	Disable or Enable optional quick boot from	N/A
Resume	S4 Resume.
Auto wake on S5	Disable or Enable auto wake up by date	N/A
	and time or at a fixed time everyday.

36 Chapter 2