■GEN-LOCK ADJUSTMENT
Phase adjustments must be performed with the camera or the RCU (RCB) when external synchronizing signals are supplied to the system in cases where multiple cameras are used or peripheral devices are connected.
ENC | OFF |
|
|
|
| PAGE | ITEM | UP | DOWN |
VF | ON |
| SC PHASE | |
|
|
| ||
USER SET |
| COARSE | FINE | |
H.PHASE | 0 | 270 |
| |
|
|
| ||
|
| 90 | 180 |
|
Horizontal phase |
|
|
| Subcarrier phase |
control |
|
|
| fine control |
Subcarrier phase coarse control
■HORIZONTAL PHASE CONTROL
Observe the waveform of the external synchronizing input signal (black burst signal) and video output signal on a
External
Video signal
[ADJUSTMENT by CAMERA]
1.Press the BAR (DOWN) switch for over 1 second to display the color bar.
2.Select page No.4 of INITIAL SET menu.
3.Select “H PHASE” with the item switch.
4.Adjust the horizontal phase with the Up switch and Down switch.
NO.4 ** INITIAL **
H PHASE | + | .... | I.... | - |
| ||||
SC COARSE |
| 0° |
|
|
SC FINE | + | .... | I.... | - |
RET END
[ADJUSTMENT WITH RCU (RCB)]
Use the horizontal phase control located in the pocket of RCU (RCB).
