4.The camera is now in scene file set mode and as shown on the right figure on the top appear on the monitor screen.
5.One of the scene files appears blinking and changes each time the item switch is pressed.
6.Press the page switch to select the desired scene file number while it is blinking.
7.Now the mode setting is completed and the new mode will be indicated on the screen for 2 seconds before the camera returns to normal shooting mode.
*When the camera is controlled with the RCU (RCB) a scene file is selected by the scene switch on the RCU (RCB) and those figure will not be displayed.
CURR:MODE1/SCENE1
SCENE1
SCENE2
SCENE3
USER A
USER B
CURR:MODE1/SCENE1
