!5Detecting Ratio Adjustment [PEAK/AVG]
The ratio of AUTO IRIS/AGC/ELC detected peak to average can be adjusted in a range of 9 steps.
!6AUTO IRIS Level Fine Adjustment Setting
[AUTO IRIS: ADJ ON/ADJ OFF]
When the mode is set to ADJ ON, fine adjustment of ALC/ AGC/ELC convergence level can be made with the iris VR control on the RCU (RCB) if the camera is used with an RCU (RCB) and the iris mode is set to AUTO in the SETUP menu.
!7Synchroscan Adjustment [SYNCHRO-SCAN: 1/525 to 253/ 525]
Shutter speed can be adjusted when the shutter speed mode is set to SYNCHRO in the SETUP menu. In shooting a monitor screen, for example, set the shutter speed mode is set to SYNCHRO and use this item for shutter speed adjustment so that horizontal bar noise will be reduced.
!8CCD Read Out Mode Setting [FLD/FRM: FIELD/
FRAME]
The position FIELD means CCD field storage. The position FRAME means frame storage, in which case vertical resolution increases.
FIELD: Set to this mode when shooting moving object
FRAME: Set to this mode when shooting still object
*It is recommended that the mode be normally kept at FIELD because, if the mode is set to FRAME, residual image will increase.
!9Gamma Correction ON/OFF Setting [GAMMA: ON,
OFF]
Gamma correction ON/OFF can be set.
*Gamma correction level can be set using a user set menu.
2D lowpass filter ON/OFF can be set to reduce cross colors.
@1Color Bar Setting (COLOR BAR: 1, 2, 3, 4]
Color bars can be selected.
1:SMPTE color bar with 0.0% setup
2:SMPTE color bar with 7.5% setup
3:Full color bar with 0.0% setup
4:Full color bar with 7.5% setup
@2Horizontal Phase Adjustment [H PHASE]
Horizontal phase can be adjusted when a genlock sig- nal is supplied.
@3Sub Carrier Phase Coarse Adjustment [SC COARSE: 0°, 90°, 180°, 270°]
Coarse adjustment of sub carrier phase can be made when a genlock signal is supplied.
@4Sub Carrier Phase Fine Adjustment [SC FINE]
Fine adjustment of sub carrier phase can be made when a genlock signal is supplied.
