Panasonic AW-E560 User Setup Menu Setting, Scene File Memory, User Set Screens, User Setting

USER SETUP MENU SETTING

■Scene File Memory

The AW-E560 has five scene file memories, of which three are preset before shipment from the factory. When the scene file menu mode is set to [1], [2], or [3], the camera operates under the preset conditions.

The remaining two, USER A and USER B, can be set as desired.

Each mode is provided with five scene files.

■User Set Screens

<Camera Alone>

	NO.1	USER A		* 0DB
	(.35-.55)		CURR		NEW
#0	*GAMMA(NOR)		.45		.45
	*GAMMA(SHT)		.45	.45
#1	KNEE POINT		98	98%
#2	WHITE	CLIP	110	110%
	*H.DTL	LEVEL H	31	31
#3	*V.DTL	LEVEL H	31	31
	*H.DTL	LEVEL L	15	15
	*V.DTL	LEVEL L	15	15
	RET	END

■User Setting

(1)Display the SETUP menu.

(2)Select the USER A or USER B of scene file from the SETUP menu.

(3)Move the cursor to USER, and press the page switch. The camera is now in the user set state, and the USER set screen appears on the monitor.

User set operation can be performed at the camera head or RCU (RCB).

<Camera with RCU (RCB)>

NO.1	USER A		* 0DB
(.35-.55)		CURR NEW
*GAMMA(NOR)		.45		.45
*GAMMA(SHT)		.45	.45
KNEE POINT		98	98%
WHITE	CLIP	110	110%
*H.DTL	LEVEL H	31	31
*V.DTL	LEVEL H	31	31
*H.DTL	LEVEL L	15	15
*V.DTL	LEVEL L	15	15

RET

∗Data of those items marked "*" can be stored in the memory at each of the gain levels (0, 9, 18 dB).

-43-