■COLOR PHASE ADJUSTMENT
Supply the output signal (split color bar) from the color special effect generator to a color monitor or vectorscope. Adjust the color phase of the camera with either the cam- era controls or the RCU (RCB) control.
White | Yellow |
| Cyan |
|
| Green |
| Magenta |
| Red |
| Blue | Color bar of | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| camera |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White |
| Yellow | Cyan | Green |
| Magenta |
| Red |
| Blue |
| Black | effects generator | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Color bar of special |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[ADJUSTMENT by CAMERA]
1. Press the BAR (DOWN) switch for over 1 second for the color bar mode.
2. Select page No.4 of INITIAL SET menu.
3. Select “SC COARSE” with the item switch. Make coarse adjustment with the Up switch and the Down switch.
4. Select “SC FINE” with the item switch. Perform fine adjustment with the Up switch and the Down switch.
NO.4 ** INITIAL **
H PHASE | + | .... | I.... | - | |
SC | COARSE |
| 0° |
|
|
SC | FINE | + | .... | I.... | - |
RET END
[ADJUSTMENT WITH RCU (RCB)]
Use the subcarrier phase coarse adjustment control and subcarrier phase fine control located in the pocket.
*It is recommended that a vectorscope be used for maximum accuracy in color phase adjustment.
