Connecting with other devices
Keeping the still pictures and motion pictures on your PC
VQT5B76
- 194 -

■Copying to your computer without using “PHOTOfunSTUDIO”

(except AVCHD motion pictures)

You can save pictures to use on your computer by dragging and dropping folders and
files into separate folders on your computer.
Directory structure of built-in memory/card of this unit
DCIM (Still/motion pictures)
100_PANA (Up to 999 pictures/folder)
P1000001.JPG
:
P1000999.JPG
101_PANA
:
999_PANA
MISC (DPOF files, Favorite)
PRIVATE*2
AVCHD (Motion pictures in AVCHD)
*1
●Windows
Drives are displayed
in “My Computer” or
“Computer” folder.
●Mac
Drives are displayed on
the desktop.
(Displayed as “LUMIX”,
“NO NAME”, or
“Untitled”.)
.JPG: Still pictures
.RW2: Still pictures recorded in
RAW file
.MP4: [MP4] Motion Pictures
.MPO: 3D still pictures
*1 New folders are created in the following cases:
• When there is a picture with file number 999 inside the folder
• When using cards already containing the same folder number (for example, pictures taken with
other cameras, etc.).
• When recording after performing [No.Reset].
*2 This folder is not created in the built-in memory.
●Before inserting or removing a card, turn the camera off and disconnect the USB
connection cable. Otherwise, data may be destroyed.
●Use a battery with sufficient battery power or the AC adaptor (optional).
●When the battery begins to run out during communication, a warning beep sounds.
Cancel communication via your computer immediately. (→193) Otherwise, data may be
destroyed.
●Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
●Setting the [USB Mode] to [PC] removes the need to make the setting each time the
camera is connected to the computer.
●For more details, consult your computer operating manual.